The old garage that we converted to a food production place came with a real challenge. The big building has a roof with a very low 1-12 slope. This type of roof tends to leak when covered with roof metal sheets, especially if the sheets overlap in the middle likeย ours did.
I tried different methods to fix the problem, but nothing really worked. The caulking did not last, evenย urethane roof cementย did not stand up to the elements.ย
To cover the roof of a 30 feet long building with metal, the roofing sheetsย would need to be at least 30+ feet longย for it to not leak. This would be expensive, and there would be no way I could do it myself. So I did research to find alternatives.
There didn’t seem to beย many alternatives available, till I got the idea to use a pond liner. It does not seem that there is much of a difference between a roof liner and a pond liner anyways, except the availability and the price tag. I even was able to get the pond liner on kijiji for a very good deal.
How to lift a pond liner
The pond liner I got came in a 10 foot roll weighingย about 360+ pounds. It was a challenge to get the roll on my truck with two men, let alone onto the roof. So what do youย do?
I screwed some boards to the truck and also to the edge of the roof and used an old lifting trick. This way my son and I were able to lift the heavy pond liner roll onto the roof. If you can’t see the video below, go here.
The underlayer for the pond liner
To protect the pond liner from rubbing on some surface irregularities we used a foam underlayer for floated laminate floor.ย It was easy to roll out and we secured it with small boards.
How to roll out the pond liner
The pond liner was triple folded. I started on one side making sure there is plenty to go all the way over the parapet. Then I unfolded the liner to cover the whole roof. Whenย covering a flat roof you want to make sure there is no overlapย where moisture can wick under.
Securing the pond liner
The garage roof has a parapetย on three sides, so I lined the whole parapet and secured the liner endย with the cap. It looks good and assures that no moisture can come in anywhere.
To prevent the liner from getting lifted by the wind, I simply placed old tires on top of the roof. A simple and free solution suggested by aย neighbor.
The pond liner has been an inexpensive and effective DIY solution that I would surely recommend for flat buildings. Pond liners work great if you can cover the roof in one piece.
We invite you to subscribe to Northern Homestead and follow us on Facebook or Pinterest for the latest updates.
Sheri Cline - WA. State Zone 8b says
Now, the next step is to get rid of those tires and replace with some low grow pots! That’s a whole lot of growing space and I can see pumpkins, zucchini & cucumbers spreading out in the available sun!
Anna says
The tires could be planters too. The challenge would be to water those planters. Since the roof is not totally flat, the water would run off. It has crossed our mind though.
deepa says
Thank for sharing this valuable information!
Afo says
Hi,
I found this through your youtube video of the lift (very good method by the way!)
Anyway, I wanted to ask if you recall the thickness of the liner? I’m looking at using pond liner for an outbuilding flat roof. EPDM membrane (1.2mm) intended for roofs is about ยฃ10 per square meter in the UK. A pond liner (0.75mm) is about a quarter of the price!! I’d be using some adhesive to stick it down, I’m just concerned that it’ll be too thin.
Any advice much appreciated.
Jakob says
We used EPDM .045โ thick wich converts to 1.14 mm. Are you certain that the pond liner is also EPDM and not PVC?
Wulfy says
Aweome and innovative creations here. I am glad I stumbled upon the link on yourubr while looking at the geodesic dome!
A the best to you all,
Wulfy
James Dewane says
I used some left over pond liner for a temporary roof patch, and then started thinking about pond liner for an entire roof. It’s easy to work with and some are guaranteed against leaking for 40 years. I’m glad to see your use of it. Did you look into adhesives at all? Holding the liner down seems to be the biggest challenge, and I must say I’m not fond of the aesthetics of the tires.
Ember S. says
How does it hold up to freezing temps, ice and snow loads, and full sun exposure? Any damage from hail or windblown debris? I’m looking forward to doing this with our barn roof and I need a trusted opinion on whether you would do this again for your roof?
Jakob says
After over 3 years we haven’t had any issues with this solution, and we would do it again for this low pitch roof. However, I don’t know how the pond liner would perform on a high pitch roof. I’d recommend you to consult a professional roofing company.